zpravodajství životního prostředí již od roku 1999

EPR Reactor from Areva

Atomová energie
EPR Reactor from Areva

EPRTM reactor: the very high power reactor (1,650 MWe)

Safety and operational performance are the key strengths of the EPRTM reactor. This pressurized water model is also the first generation III+ reactor to be deployed on an international scale, being built in three different countries.

Field Report: New Plants Safety & Licensing

Fulfilling new-generation safety requirements makes economic sense. Utilities must satisfy new and ever increasing safety requirements and achieve the best economics possible. The EPRTM design does both. Watch, listen and read the complete Field Report on New Plant Safety & Licensing.

The EPRTM reactor has an electrical production capacity of more than 1650 MWe, which places it among the most powerful reactors in the world. A direct descendant of previous models manufactured by AREVA, the EPRTM pressurized water reactor is based on tried-and-tested technologies and principles. It is classified as a generation III+ reactor due to the level of safety obtained and the economic savings that it achieves in relation to the earlier models.

From a safety point of view, the EPRTM reactor ensures an unequalled safety level thanks to a drastic reduction of the probability of severe accidents as well as of their consequences on the environment. In addition, it is particularly resistant to external incidents (airplane crashes, etc.).

Economically, it achieves an unrivalled level of competitiveness because electricity production costs are reduced by 10%, compared with current plants. It also produces less waste.

It is currently under construction in Finland (Olkiluoto), in France (Flamanville) and in China (2 units in Taishan), and is currently undergoing certification in the United States and the United Kingdom.

Safety, Competitiveness, Flexibility

  • Unrivalled level of safety: Resistance to plane crashes and seismic vibrations; quadruple safety device redundancy; core meltdown risk further reduced and minimization of the consequences from such an accident thanks to a special compartment isolating the molten core.
  • Active and passive safety systems : designed as an extension of the Konvoi (Siemens) and N4 (AREVA) reactors, the EPRTM reactor combines active and passive safety systems to increase safety and provide better process control over plant operation


  • High power: The power output of the EPRTM reactor originates from the size of its larger core, which is capable of holding more fuel, and its advanced nuclear steam supply system comprising 4 primary coolant loops.
  • Reduced operating costs: Reduction in fuel consumption and easier system maintenance.
  • Maximized electrical production through reliable components, proven technologies and maintenance during operation, permitting shorter unit outages.
  • Environmental protection: Reduction in fuel consumption per kWh and production of long-life waste products (-15%), through improved thermal efficiency and uranium utilization.
  • An unrivalled experience on large projetcs: AREVA is the only manufacturer to benefit from 40 years continuous experience in the design and construction of nuclear power plants; there are three programs for construction of EPRTM plants underway, enabling AREVA to gather unrivalled experience; almost all primary circuit components are designed and manufactured by AREVA.

Innovation for performance
Two innovations contribute to the EPRTM reactor's high thermal efficiency:

  • Steam generators with an axial economizer provide increased steam pressure and noticeably increase the reactor's thermal efficiency. This components were developed and tested in the N4 type reactors.
  • A neutron reflector surrounding the core reduces fuel consumption by limiting neutron leakage. It increases the lifespan of the reactor pressure vessel by limiting its irradiation and its embrittlement.

Service life: 60 years


  • Load follow: between 60 and 100% nominal output, the EPRTM reactor can adjust it power output at a rate of 5% nominal power per minute at constant temperature, preserving the service life of the components and of the plant.
  • A varied choice of fuels: An EPRTM power plant can operate with uranium enriched up to 5%, reprocessed uranium or MOX fuel (in variable proportions according to customer needs and up to 100%).
  • Irradiation cycle: fuel cycle length possibility between 12 and 24 months, for better management of a power plant fleet.

ZDROJ: www.areva.com

Komentáře k článku. Co si myslí ostatní?

Další články
Chystané akce
Ekologický institut Veronica
8. 2017
28.8-3.9.2017 - Ostatní akce
Centrum Veronica Hostětín, Hostětín 86
ASIO, spol.s r.o.
9. 2017
22.9.2017 - Ostatní akce
od 09:30 do cca 11:00, na YouTube
9. 2017
22-24.9.2017 - Seminář, školení
Ekodomov, V Podbabě 29B, Praha 6
ASIO, spol.s r.o.
10. 2017
27.10.2017 - Ostatní akce
od 09:30 do cca 11:00, na YouTube
Podněty ZmapujTo
Mohlo by vás také zajímat
Naši partneři
Složky životního prostředí